Table of Contents
Advertisement
IMPORTANT:
CAUTION:
OPERATING INSTRUCTIONS:
1.
Before using the hotplate, polish the ceramic surface according to the instructions provided.
2.
Hotplates are equipped with an infinite switch for each cooking/heating element, allowing an adjustable
temperature setting (OFF, LOW. through HIGH).
3.
The control light glows when the heating elements are turned "ON".
4.
The "HOT SURFACE" indicator light will continue to glow until the surface has cooled to approximately 150°F.
5.
" HIGH SPEED" efficient radiant elements provide instant heat for extra-fast cooking - cold to full heat in 4
seconds. The element will cycle ON - glowing red - and OFF, even on the "HI" setting, to maintain the chosen
temperature setting.
Cooking Hints:
1.
Save energy costs by turning the unit off when not in use. Due to instant warm-up, it's not necessary to leave
the unit on low heat during intermittent usage.
2.
For best results, start cooking at the "HI" setting, then turn the control knob down.
3.
Maximize heat efficiency by using flat bottom pots or pans sized for the elements. The hotplate is designed for
10-inch diameter pans.
4.
Do not pre-heat the elements. Turn on the element after placing a filled pan on the unit.
CLEANING INSTRUCTIONS:
Use only cook top cleaning creme on the Ceramic surface. The cleaning creme leaves a protective coating. Clean
up spills often to ensure top performance. A razor scraper may be used to remove cooked on food. Keep the razor
blade flat against the surface to avoid scratching.
1.
Turn all temperature control knobs to the "OFF" position.
2.
Allow unit to completely cool, and the " HOT SURFACE" indicator light must be off.
3.
Unplug power cord.
page 12
OVEN COOK TOP PROVIDED WITH
CERAMIC HOTPLATES
TO OBTAIN THE BEST COOKING RESULTS WITH THE
CERAMIC HOTPLATES, FOLLOW ALL INSTRUCTIONS
CAREFULLY.
CERAMIC SURFACE IS HOT UNTIL THE "HOT SURFACE"
INDICATOR LIGHT SHUTS OFF.
MODEL OC-4HC
Advertisement
Table of Contents
