Selecting A Buttonhole - Pfaff 3119 Instruction Manual

10

Selecting a buttonhole

.03
31 different buttonhole models can be selected. Depending on the sub-class up to 48 fixed
programs are allocated to each model. The desired fixed program is selected by choosing
the cut length and stitch density. With a maximum of 16 cut lengths and 3 stitch densities
this gives a total of 48 fixed programs.
Buttonhole design:
Extension of the
purl seam
+
● Select the cut length (depends on the knife installed).
-
● Select the stitch density.
+
● If necessary adjust the buttonhole width.
-
+
● If necessary adjust the cut width (left)/purl seam extension (right).
-
Purl seam A
Bar D
12,7
Buttonhole width
Cut width
Sewing
Bar B
Purl seam C
10 - 3