Changing The Knife / Knife Height - Pfaff 3119 Instruction Manual

13

Changing the knife / knife height

.27
Requirement
When the punching or cutting device is in its neutral position, knife 2 should be 23 mm
(punching device) or 20 mm (cutting device) away from needle plate 6.
Fig. 13 - 23
Changing the knife:
● Remove and replace knife 2 (screw 3).
● Set the knife height as described below.
Knife height on machines with punching device:
● Adjust knife 2 (screw 3) according to the requirement with the aid of adjustment gauge 4
(Part no. 61-111 635-86).
Knife height on machines with cutting device:
● Adjust knife 5 (screw 3) according to the requirement.
3
2
4
6
56-061a
Danger of injury from dropping knife!
Activate knife lock (move lever 1 in the direction of the arrow).
Adjustment
1
65-004
3
56-061b
5
6
13 - 26