Operating Panel With Display Of The Buttonhole Model - Pfaff 3119 Instruction Manual

Sewing
10

Operating panel with display of the buttonhole model

.02
What is shown on the display screen:
20:
+
-
12.7:
+
-
1500:
10 - 2
20 12.7
+ +
- -
Buttonhole model
The buttonhole model can be altered with the corresponding plus/minus key. If
variable programs are selected (see cut length) the number of the buttonhole
model allocated to the variable program appears. No value is shown when special
programs are selected.
Cut length
The value can be altered directly with the corresponding plus/minus key.
The buttonhole is selected by selecting the cut length (from 6.4 mm to 38.1 mm
depending on the sub-class) in conjunction with the selected
stitch density.
After moving through the area with the cut length values, the program numbers of
the stored variable and special programs appear on the display.
Only the program numbers occupied are displayed, variable programs from 1 to 39,
special programs from 40-49.
The selection keys for the stitch density are used
selecting these programs. The currently selected program number is stored on
the corresponding selection key if the selection key is pressed for longer
than 2 seconds.
Depending on the activated function (piece counter or reverse counter) the
number of buttonholes already sewn or the number still to be sewn is displayed.
1500
Made in Germany
+
-
as call-up keys for