Selecting The Buttonhole - Pfaff 3119 Instruction Manual

Sewing
1500:
10

Selecting the buttonhole

.01.02
It is possible to select 31 different buttonhole models. Fixed programs are allocated to each
model, depending on the subclass. The desired fi xed program is selected by choosing the
cutting length and one of the three stitch densities.
Buttonhole design:
●
44
In addition, previously selected cut lengths, variable or special programs can be
selected with the corresponding plus/minus key (also see Chapter 11.07 Selecting
programs).
Selected programs are marked on the display with an " * ".
Piece counter / reverse counter
Depending on the activated function (piece counter or reverse counter) the
number of buttonholes already sewn or the number still to be sewn is displayed.
Seam A
Extension of the
purl seam
Bar D
4 0 0 0 1 2 . 7 1 5 0 0
Select the cut length (depends on the knife installed).
Buttonhole width
Cut width
Bar B
Seam C