Adjustment Of Buttonhole Feed Balance - The Colums - Pfaff Hobby 1122 Service Manual

Adjustment of buttonhole feed balance - The colums

Requirements
When sewing a buttonhole, the stitches on each side of the buttonhole should be the same density.
Check
• Select the bartrack on the Buttonhole indication
• Attach the buttonhole foot (R).
• Sew a buttonhole.
• The stitches on each side of the buttonhole should be of the same stitch density.
Adjustment
• Remove the cap (E).
• If the left row is denser (A), turn the adjusting screw (G) in the direction (C).
If the right row is denser (B), turn the adjusting screw (G) in the direction (D).
• Attach the cap (E).
(E)
(D)
(G)
(C)
(A) (B)
104 72 62-26 21