Special Programs; Pc-Programs (Optional); Sam (Sewing Application Manager); Osca (On-/Offline Sewing Creativity Arrangement) - Pfaff 3119 Instruction Manual

Input
11

Special programs

.06
The programs 40 to 49 are reserved for special programs. With the programming software
OSCA the seam contours are freely programmed on a PC in the available sewing area, which
depends on the sub-class. The images are then transferred by connecting the PC to the
machine.
11 PC-programs
.07
11 SAM
.07.01
SAM is an easy PC program for saving all machine data and for programming variable
programs with the support of graphics. The details of the SAM functions are:
● Administration of all fixed, variable and special programs
● Visualisation of all programs (parameters, shape and stitch position)
● Creation of variable programs with the support of graphics by entering parameters
● Transfer of variable and special programs from and to the machine
● Saving and restoring of all variable programs, special programs, machine data,
● Flash programming (software update of the machine)
11

OSCA (On-/Offline Sewing Creativity Arrangement)

.07.02
OSCA is a PC-program for programming free seams with the support of graphics. Depending
on the sub-class it is possible to program any seam line in the available sewing area.
OSCA is also used to create the special programs 40 to 49. These programs can then no
longer be altered in the machine. To transfer data to the machine the PC is connected to the
machine with a serial cable.
11 - 12
(optional)
(Sewing Application Manager)
configuration data of the machine