Allocating Access Rights - Pfaff 3119 Instruction Manual

Input
11

Allocating access rights

.04
● Switch on the machine.
● Switch to parameter input ( LED in the key is not on ).
+
● Select the function group "800" with the appropriate plus / minus key.
-
● Confirm input with Enter.
● Enter code ( e.g. 3119 )
● Confirm input with Enter.
+
● Select the required parameter "801" to "818" with the appropriate plus / minus key, , , , ,
-
+
● Release or lock the selected parameter with the appropriate plus / minus key.
-
● Take over setting with Enter or by selecting Operational mode Sewing. . . . .
11 - 4
800
+
-
Code: 3119
+
-
801
+
-
see Chapter 13.48 Parameter settings.
818
+
0: Parameter function is freely accessible.
-
1: Parameter function only available after access code has been entered.
If all parameters ( 801 to 818 ) are set at "0", no further enquiry for the
access code ensues.
+
-
+
-
0
+
-
1
+
-