13
Needle thread cutter
.29
Requirement
1. The distance between the lower edge of the needle thread cutter 1 and the work
clamp 5 must be 0.5 mm.
2. The opened needle thread cutter 1 should reliably catch the needle thread.
Fig. 13 - 25
● Adjust the needle thread cutter 1 ( screw 2 ) according to requirement 1.
● Adjust clamp 3 ( screw 4 ) according to requirement 2.
( vertical and horizontal adjustment )
4
3
5
Adjustment
2
1
13 - 28