To Use Headset - NEC UNIVERGE SV9300 DT410 User Manual

TO USE HEADSET

TO MAKE/ANSWER A CALL
WITH HEADSET
By using optional headset, it is possible to originate
or respond to call. During using a headset, the
onhook/offhook operation can be made by
Headset/Handset feature key.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
TO MAKE A CALL USING
HEADSET
While placing the handset on the terminal, make a
call using the headset.
1. Press Headset/Handset feature key.
Headset/Handset feature key lamp lights red.
→
Line key lamp lights green. →
2. Dial a desired number.
3. Start conversation after called party
answered.
4. Press Headset/Handset feature key
once again, after finishing a call.
Headset/Handset feature key lamp goes off.
→
Line key lamp lights off. →
TO ANSWER A CALL USING
HEADSET
While placing the handset on the terminal, answer
a call using the headset.
1. While hearing a ringing tone, press
Headset/Handset feature key
Headset/Handset.
feature key lamp lights red. →
2. Start conversation with calling
party.
3. Press Headset/Handset feature key
once again, after finishing a call.
Headset/Handset feature key lamp goes off.
→
Line key lamp lights off. →
During a call in progress using handset, you
can switch to the headset by pressing the
Headset/Handset feature key.
It is possible to answer a call by pressing line
key after pressing the Headset/Handset
feature key. Also you can answer a call by
pressing Answer key after pressing the
Headset/Handset feature key. For details,
please contact the system administrator.
28
TERMINAL SETUP