One-Touch Speed Calling Keys - NEC UNIVERGE SV9300 DT410 User Manual

ONE-TOUCH SPEED
CALLING KEYS
This feature allows a terminal user to dial
frequently-called numbers by pressing a One-
touch key assigned for Station Speed Dialing.
Up to 32 digits can be registered for each dial
number.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
TO PROGRAM
Following explains how to register phone number
to a One-touch Speed Calling key.
1. Press Feature key.
Feature key lamp lights red. →
2. Press One-touch Speed Calling key.
Feature key lamp flashes red. →
Speaker key lamp lights red. →
3. Dial a desired number.
11:00 AM SUN 1 JUN 2014
Recall PICK
4. Press Feature key.
Feature key lamp goes off. →
Speaker key lamp goes off. →
SET
11:00 AM SUN 1 JUN 2014
MIC DIR
If you dial a wrong number, you will need
to start again from the beginning
To register a pause, press
any digits. The pause can not be registered
as a first digit.
81XXXXXXXXXX
>>>>
HIST. >>>>
between
When a phone number has been already
registered in One-touch key, that number is
displayed on the LCD. The previous number
will be cleared when you register a new
number.
TO VERIFY
Following explains how to confirm the registered
number in the One-touch Speed Calling key.
1. Press Feature key.
Feature key lamp lights red. →
2. Press a desired One-touch Speed
Calling key.
Feature key lamp flashes red. →
Speaker key lamp lights red. →
11:00 AM SUN 1 JUN 2014
Recall
3. Press Speaker key.
Feature key lamp goes off. →
Speaker key lamp goes off. →
TO MAKE A CALL
Following explains how to make a call with One-
touch Speed Calling key.
1. Press One-touch Speed Calling key.
Speaker key lamp lights red. →
The desired number is automatically dialed.
11:00 AM SUN 1 JUN 2014
Recall
2. When party has answered, lift the
handset.
Speaker key lamp goes off. →
0:00:05
11:00 AM SUN 1 JUN 2014
MIC
35
FEATURE OPERATION
00:81XXXXXXXXXX
PICK >>>>
81XXXXXXXXXX
PICK >>>>
81XXXXXXXXXX
Mute