NEC UNIVERGE SV9300 DT410 User Manual page 94

2. Confirm both Connect key and Path key are lighting green.
3. Lift the handset to answer the call.
4. Start conversation with calling party.
TO MUTE A MIC
During conversation with hands free (using microphone and speaker of the terminal), it is possible to mute the
microphone with the following steps.
1. Press Soft key (MUTE).
The microphone is muted.
The calling party's voice can be heard from the speaker.
2. Press Soft key (MUTE) once again.
The microphone becomes available.
PLAY MUSIC BY USING TERMINAL SPEAKER
When the terminal and smart device is connected through Bluetooth, it is possible to play music which is stored
in smart device by using terminal speaker.
PLAY MUSIC
1. Play music of smart device.
Refer to the users' manual of smart device for how to play music.
2. When the terminal handset is onhook, Speaker lamp lights red. →
The music is heard from terminal speaker automatically.
3. Adjust the volume level by using
If you lift the handset during playing music by using terminal speaker,
the music will be heard from handset receiver. And after you replace
the handset, the music play is stopped.
STOP THE MUSIC PLAY FROM SPEAKER
1. Press Speaker key.
Speaker key lamp goes off. →
2. The music play from speaker is stopped.
If you press the Speaker key once again, the music is played from the
terminal speaker.
If the sound is small or distorted, please adjust the volume on smart
device.
After stopping the music play from terminal speaker, the music keeps playing on smart device. If you want
to stop the music, please stop it on smart device.
APPENDIX C PAIRING WITH SMART DEVICE
key.
87