Step Call; Call Waiting - NEC UNIVERGE SV9300 DT410 User Manual

STEP CALL

This feature allows the terminal user, after calling
a busy terminal, to call an idle terminal by simply
dialing an additional digit.
The feature is set by system data setting at
initial installation. For details, please contact
the system administrator.
1. Lift the handset.
Line key lamp lights green. →
BUSY
11:00 AM SUN 1 JUN 2014
CB CW
2. Dial the extension number.
You will receive a busy tone.
3. Dial the last digit (0-9) of another
terminal.
Example: Dial "2".
11:00 AM SUN 1 JUN 2014
MIC Mute
It is possible to select the last digit of the
extension number from 0-9 arbitrarily.

CALL WAITING

TO ACTIVATE CALL WAITING
201
>>>>
202
TO ANSWER CALL WAITING
50
FEATURE OPERATION
This feature allows a terminal to camp itself on to
a busy terminal.
This feature is available only for the terminal
that is set by system data setting at initial
installation. For details, please contact the
system administrator.
1. Receive a busy tone.
BUSY
11:00 AM SUN 1 JUN 2014
CB CW
2. Press Transfer key.
3. Press Soft key (CW).
You will receive a special ringback tone.
CW SET
11:00 AM SUN 1 JUN 2014
Recall VOICE
1. Call in progress.
11:00 AM SUN 1 JUN 2014
MIC Mute
2. Call Waiting feature is set.
Answer key lamp flashes red. →
You will receive a Call Waiting tone (three
tone bursts).
CALL WAITING
11:00 AM SUN 1 JUN 2014
MIC Mute
201
>>>>
201
CB >>>>
210
201