5.
Mount the Modular Rosette at the WM-L UNIT hole space.
If the modular rosette is not used, proceed to the following step6.
6.
Plug the modular plug of line cord into the connector of the modular rosette.
7.
Put the remaining line cord at the bottom of WM-L UNIT. And plug the modular plug of
line cord into the LINE connector on the terminal.
Wall
(1) WM-L UNIT
(2) Modular Rosette
(1) Modular Rosette
(2) Line Cord
18
(1)
(2)
(1)
(2)
INTRODUCTION