Appendix D To Set Bca Option Unit; To Enable/Disable Auto Connection - NEC UNIVERGE SV9300 DT410 User Manual

APPENDIX D TO SET BCA OPTION UNIT

This section explains how to set BCA option unit. (Bluetooth Connection Adapter)

TO ENABLE/DISABLE AUTO CONNECTION

Auto Connection is the function to connect the terminal with smart device through Bluetooth using BCA option
unit. The connection is initiated with predetermined interval by BCA option unit. And the connection will be made
if you place the smart device that has been connected last through Bluetooth near the terminal. (Effective range
of Bluetooth radio interface is within 10 meter from the terminal approximately.)
1. Press key to display the Menu Screen.
2. Select " settings".
Select one of the following operations.
• Highlight an item by using
• Press .
3. Select " Peripherals".
Select one of the following operations.
• Highlight an item by using
• Press .
[Menu]
1 Call History
2 Directory
Back
, and press ,
[Menu]
3 Settings
4 Shortcut
Back
, and press ,
[Settings]
5 Peripherals
Back
88
APPENDIX D TO SET BCA OPTION UNIT
1/2
OK
or Soft key (OK).
2/2
OK
or Soft key (OK).
3/3
OK