NEC UNIVERGE SV9300 DT410 User Manual page 93

TO ANSWER A CALL USING BCA OPTION
The terminal can receive an incoming call from both communication server and smart device.
TO ANSWER A CALL FROM COMMUNICATION SERVER
1. While hearing a ringing tone.
Call Indicator Lamp lights.
Answer key Lamp lights red. →
Line key lamp lights red. →
2. Confirm the Path key lamp is off or lights orange.
(The terminal is in Wired Telephone mode)
3. Lift the handset start conversation with calling party.
It is possible to answer a call by pressing speaker key for hands free
conversation.
When the terminal is Wired Telephone mode and if the incoming calls are
received from both communication server and smart device at the same
time, the call from communication server is answered by lifting handset
or pressing speaker key.
When the terminal is in Mobile Phone mode, the Path key lamp is lighting
green. In this case, you can answer to an incoming call by pressing Path
key to change to the Wired Telephone mode prior to lift the handset.
When an incoming call is received, the Call Indicator Lamp flashes as follows.
LAMP INDICATION
Flashing Red
Flashing Blue
Flashing Red and Blue Receiving an incoming call to both the terminal and smart device at the same time.
TO MAKE A CALL
If you make a call through communication server, confirm both Connect Key and Path key are lighting green. And
then dial the desired number. For details, refer to
The terminal is not possible to make a call to mobile phone network
through the smart device.
TO AMSWER A CALL TO THE SMART DEVICE BY USING
TERMINAL HANDSET
1. An incoming call is terminated to the smart device.
Receiving an incoming call from communication server to the terminal.
According to the system setting, the lamp will be flashing in another color.
For details, please contact the system administrator.
Receiving an incoming call from mobile network to the smart device.
"MAKING A CALL" on page
APPENDIX C PAIRING WITH SMART DEVICE
TERMINAL STATUS
86
29.