Table of Contents
Advertisement
MOUNTING AND CONNECTING
-
Programming the home position:
Home position is a freely programmable camera position to which the motor returns
after a preset idle time period. The home position has the number „00". Programming is
done via the KB-485 keyboard.
Following entries are possible:
1. Store home position
Enter: S/P
2. Define home position time
Enter: H/T xx (xx = idle time in seconds x 2,5)
Time count starts when the last position
the selected camera position will
be stored as home position.
After expiry of the pre-determined time
the unit will automatically go to position 00.
selected is reached.
Enter H/T00 to stop the home position function.
-22-
Advertisement
Table of Contents
