Table of Contents
Advertisement
GENERAL INFORMATION
Dear Customer!
By selecting this videotronic product you have decided to use a professional device
which guarantees highest quality and reliability.
We like to thank you very much for your confidence and kindly ask you to read the
following instructions carefully before operating in order to be able to take full
advantage of all quality features regarding this product.
Safety Precautions
1.
Read the following instructions carefully before operating the unit to avoid eventual
damages by improper installation.
2.
Installation may only be done by authorised personnel in compliance with the local
safety regulations.
3.
Operate the P/T unit with 230 V/AC, 50 Hz (+/- 10%) power supply via the
attached power supply unit in the junction box.
4.
Before installing the device, the end positions of the P/T unit have to be adjusted
to the local conditions at site!
5.
If any liquid or solid matter should get into the housing, disconnect the unit from
power supply and have it checked by your authorised dealer before re-using.
6.
Never use the device for a purpose other than designated.
7.
If the unit is not being used for an extended period of time, disconnect from power
supply.
8.
Repairs may only be carried out by authorised technicians.
9.
The product has left the factory in perfect condition. To ensure proper and secure
function, the user must follow all safety information and warnings attached to these
instructions.
Items delivered
•
Variable high speed pan/tilt motor incl. integrated telemetry receiver boards.
•
26-pin system cable to connect a VIDEOTRONIC VI 'System Camera'.
•
Service junction box (IP65) for connection of all necessary cable junctions and
power supply.
•
2 x lateral cover for mounting bracket.
-4-
Advertisement
Table of Contents
