Operating The Camera Station; Operating The Motor With Presets - videotronic SN-15AH PPHS Mounting And Operation Instructions

MOUNTING AND CONNECTING

Operating the camera station

Control of the camera station is done with the BG-ALL control keys. To control the
pan/tilt functions, use the arrow keys (up, down, left, right); to control the motorzoom
lens, use the zoom and focus keys.

Operating the motor with presets

You can store up to 100 individual camera positions (00 - 99) and call them via alarm
inputs or directly from the KB-485 keyboard. To call a preset position, enter P and the
corresponding 2-digit position number. If this camera position shall be overwritten with a
new position, enter "S/P". The previously called camera position will be stored with the
new picture detail. Storage will be acknowledged with a short beep at the keyboard. The
unit stores all motor positions, zoom lens positions (zoom/focus) and other additional
functions, such as auto focus, backlight and shutter (if available).
- Calling a camera position number:
Keys "P xx"
e.g. "P 02"
- Storing a camera position number:
Keys "S/P"
xx = 2-digit position number
camera position 02 will be called
The last position number
selected will be overwritten
with the actual camera position.
-20-