Table of Contents
Advertisement
Configuration
3.2.13
POSITION
In this menu you can save the zoom and focus settings (see Chapters 3.2.9
and 3.2.11). You can allocate position numbers to the settings and
automatically switch to these position when an alarm is received.
Note: You can alter the focus and zoom settings manually on the rear of the
camera (see Chapter).
G Move the arrow
to the <POSITION> menu.
G Press the <ENTER> key to open the input
mode.
G Press the <UP> or <DOWN> keys to open
the corresponding submenu.
SAVE
In this menu you can allocate the zoom and focus settings to each of the
positions and then save them.
G Press the <ENTER> key to open the input
mode.
G Use the <UP> or <DOWN> keys to select
a storage location and press the
<ENTER> key.
Note: You can save up to 64 positions.
G Press the <ESC> key to quit the
submenu.
HQ−IDC−23012P
Order No. M578527AC/112003
© 2003 videotronic gmbh
ALL RIGHTS RESERVED
with the <Down> key
SETUP MENU [3/4]
POSITION
H−GAIN
V−GAIN
MOTION
IR
INITIAL
Fig. 37
POSITION
POSITION SAVE
POSITION SAVE
Fig. 38
POSITION
SAVE
+6
+6
ON.
ON.
ON
3
35
Advertisement
Table of Contents
