KDC User Manual
KDC Mode Menu
The KDC Mode Menu has two options – Normal mode and Application mode.
Normal
This is the default mode that provides basic barcode scanning. In Normal mode, barcode
data can be manipulated directly through the KDC or through KTSync
synchronization process.
Application
This mode allows you to run the user application created by the Application Generation Tool,
as described in
View Data Menu
This menu option allows you to view and/or delete barcodes stored in the KDC. In the case of
the KDC20/30, you can delete the last scanned barcode by pressing the DELETE button on
the right side of the unit.
Set Barcodes Menu
This menu lists all the barcode symbologies supported by the KDC and allows you to select
the barcode symbologies to be scanned. For maximum scan performance, you should select
only the symbologies that you will be scanning. Please refer to
Symbologies
Code Options Menu
The KDC supports various Code Options, including Transmission of Start and Stop
Characters, Symbology Conversion, Verification of Optional Check Character, and
Transmission of Check Digit. Please refer to
detailed explanation of each option.
Scan Options Menu
Scan Angle
54
Chapter 7 Application Generation.
Press the Delete button to delete the last
scanned barcode.
Figure 17 - Delete Function in KDC20/30
for a detailed listing of symbologies supported by the KDC.
(Opticon model only)
O
PERATING YOUR
11. Appendix – 11.1
11. Appendix A – 11.2 Code Options
Revision 3.06.A3
Copyright®2014, KOAMTAC, Inc.
KDC
®
during the
for a