KoamTac KDC20 User Manual page 109

KDC User Manual
S
YNCHRONIZATION
Destination of data




Synchronization Options





109
The KTSync program wedges or downloads barcode data to one of the following
four destinations:
File: The KTSync makes a file name based on 3.11 if file name is specified as an
"sn_timestamp.txt". The default directory is /Users/Shared/KTSyncData
directory. The user can define another directory or another filename by clicking
the "New" button. The maximum file path length is 128 characters.
Internal viewer: The KTSync displays barcode data in KTSync internal text viewer.
Active window: The KTSync sends barcode data to current active window if Active
window option is selected.
User application: The user can define the target application by pressing the "New"
button. The maximum application name path length is 128 characters.
Synchronize KDC clock
KTSync will set the KDC's date and time with Mac PC date and time when the
KDC is connected to Mac, if this option is enabled.
Burst synchronization
KTSync will synchronize barcode data from KDC in burst mode. Otherwise,
KTSync would synchronize barcode data one by one. This option is enabled by
default and cannot be disabled.
Synchronization on connection
KTSync will automatically synchronize barcode data from the KDC when the KDC
is connected, if this option is enabled.
Clear KDC memory after synchronization
KTSync clears barcode data stored in the KDC's memory once synchronization
has finished, if this option is enabled.
Append data to file
KTSync appends synchronized data to existing file specified on destination. If file
does not exist then KTSync creates a new file.
Revision 3.06.A3
Copyright®2014, KOAMTAC, Inc.