Kdc Mode Menu; View Data Menu; Set Barcodes Menu; Code Options Menu - KoamTac KDC200 User Manual

KDC Mode Menu

The KDC Mode Menu has two options – Normal and Application modes.
Normal: This is the default mode which provides basic barcode scanning. In Normal mode
barcode data can be manipulated directly through the KDC or using KTSync
synchronization process.
Application: This mode allows you to run the user application created by Application Generation
Tool described in Chapter 6.

View Data Menu

This menu option allows you to view and/or delete barcodes stored in the KDC.

Set Barcodes Menu

This menu lists all the barcode symbologies supported by your KDC and allows you to select the
barcode symbologies you will be scanning. For maximum scan performance, you should select only the
symbologies you are scanning. Please refer to Appendix A.1 – Symbologies for a detailed listing of
symbologies supported by your KDC.

Code Options Menu

Your KDC supports various Code Options including Transmission of Start and Stop Characters,
Symbology Conversion, Verification of Optional Check Character, and Transmission of Check Digit.
Please refer to Appendix A.2 Options for a detailed explanation of each option.

Scan Options Menu

Scan Angle: Allows you to configure the laser beam angle to the barcode. Wide is 54
o
is 27 . The default is Wide.
Filter: Allows you to change the Filter mode from Normal to High for poor quality barcodes.
The default is Normal.
Timeout: Allows you to set the length of time before the KDC will stop scanning a barcode from .5
second up to 10 seconds. The default is 2 seconds.
Minimum Barcode Length: Allows you to set a barcode length from 2(KDC100/200)/4(KDC300)
characters to 36 characters. It is strongly recommended that you maximize the minimum barcode
length setting to prevent possible errors. The default is 4 characters.
Security Level: Allows you to ensure an accurate barcode reading by setting the number of times
28
KDC200 User Manual
®
during the
o
and Narrow