Kdc Mode Menu; View Data Menu; Set Barcodes Menu; Code Options Menu - KoamTac KDC100 User Manual

KDC Mode Menu

The KDC Mode Menu has three options – Normal, Onetime, and Continuous modes.
Normal: This is the default mode which provides basic barcode scanning.
In Normal mode barcode data can be manipulation directly through the
KDC or using KTSync® during the synchronization process.
Onetime: This mode allows you to define a master barcode and then
compare another barcode to the master barcode one time.
Continuous: This mode allows you to define a master barcode and then compare multiple
barcodes to the master barcode continuously.
Collation: This mode works in conjunction with Onetime and Continuous modes, allowing you
to define a string of characters within the master barcode and a string of characters within a
slave barcode for comparison in Onetime or Continuous modes.

View Data Menu

This menu option allows you to view and/or delete barcodes stored in the KDC.

Set Barcodes Menu

This menu lists all the barcode symbologies supported by your KDC and allows you to select the
barcode symbologies you will be scanning. For maximum scan performance, you should select
only the symbologies you are scanning. Please refer to Appendix A.1 – Symbologies for a detailed
listing of symbologies supported by your KDC.

Code Options Menu

Your KDC supports various Code Options including Transmission of Start and Stop Characters,
Symbology Conversion, Verification of Optional Check Character, and Transmission of Check Digit.
Please refer to Appendix A.2 – Code Options for a detailed explanation of each option.
14
KDC100 User Manual