KDC User Manual
B
ARCODES
15. Appendix F – Multiple Special Barcodes
This chapter explains how to make a multiple configuration barcode for the KDC to configure
multiple KDC settings by scanning one barcode. The KDC provides special barcodes that
enable changes to the KDC configuration; but, this current barcode changes only one
configuration. New KDC firmware VersionR_305 introduces a feature to enable the user to
make one special barcode to change multiple KDC configurations.
15.1 KDC20/KDC100/KDC250/KDC350L/KDC410/
233
KDC415
Barcode type Code128 is used to make a single special barcode and its format is as
follows:
<FNC3><Barcode String>
Here, the <FNC3> is a Code 128 control character and the <Barcode String> is an ASCII string for each
KDC configuration.
The multiple configuration Code128 barcode format is as follows and has a control
character and series of barcode strings.
<FNC3><Barcode String 1>;;;;; <Barcode String N>
Here, the <FNC3> is a Code 128 control character and the <Barcode String 1> and <Barcode String
N> are an ASCII string for each KDC configuration. The ';' is a separator for each configuration's
barcode string. Please see user manual for the <Barcode String> for KDC configuration.
Example: Assume the user is changing the following configurations with one barcode.
Change Wedge/Store to "Wedge Only" <FNC3>82000
Change Termination Character to "None" <FNC3>88000
Change Bluetooth "Auto PowerOff" to "Disabled" <FNC3>64010
<FNC3>82000;88000;64010
M
S
ULTIPLE
Revision 3.06.A3
Copyright®2014, KOAMTAC, Inc.
PECIAL