Kdc Mode Menu; View Data Menu; Set Barcodes Menu; Code Options Menu - KoamTac KDC100 User Manual

KDC Mode Menu

The KDC Mode Menu has three options – Normal, Onetime, and Continuous modes.
Normal: This is the default mode which provides basic barcode scanning. In Normal mode barcode data
can be manipulation directly through the KDC or using KTSync® during the synchronization process.
Onetime: This mode allows you to define a master barcode and then compare another barcode to the
master barcode one time.
Continuous: This mode allows you to define a master barcode and then compare multiple barcodes to
the master barcode continuously.
Collation: This mode works in conjunction with Onetime and Continuous modes, allowing you to define a
string of characters within the master barcode and a string of characters within a slave barcode for
comparison in Onetime or Continuous modes.

View Data Menu

This menu option allows you to view and/or delete barcodes stored in the KDC.

Set Barcodes Menu

This menu lists all the barcode symbologies supported by your KDC and allows you to select the barcode
symbologies you will be scanning. For maximum scan performance, you should select only the symbologies
you are scanning. Please refer to Appendix A.1 – Symbologies for a detailed listing of symbologies supported
by your KDC.

Code Options Menu

Your KDC supports various Code Options including Transmission of Start and Stop Characters, Symbology
Conversion, Verification of Optional Check Character, Transmission of Check Digit, and Concatenate. Please
refer to Table 3 – KDC300 Menu Options for a detailed listing of Code Options for the symbologies supported
by the KDC.
16
KDC300 User Manual