KoamTac KDC20 User Manual page 70

KDC User Manual
Auto Erase
If enabled, this feature erases stored barcodes on the KDC once the 'Buffer Full' condition is
reached.
Sleep Timeout
This option allows users to set the amount of time the KDC waits before going to
not being used).
Auto Power Off (KDC250/350)



Date/Time
In this option, users can set the date and time of the KDC, which can also be set using
KTSync
Battery
This option shows the current status of battery power level.
Version
This option shows the KDC firmware version and serial number.
Button Lock
This option allows users to lock or unlock the KDC scan and scroll buttons.
Beep Alert




Beep Volume
This option allows user to adjust the beep volume from High to Low.
MFi Mode (KDC20i, 30i, 200i, 250i, 300i, 350i, 400i)
This option allows user to enable or disable MFi mode. MFi mode supports SPP and MFi
Bluetooth profiles. Non-MFi mode supports SPP, SPP2.0, HID iOS and HID normal.
Vibrator
70
Bluetooth: Enabled/Disabled
GPS: Enabled/Disabled
Power Off Time:0(Never), 5, 10, 20, 30, 60, 120 minutes
®
.
Beep Sound: Enables or disables KDC beep sound.
Power On Beep: Enables or disables beep sound when KDC power is on.
Beep On Connect: Enables or disables beep sound when KDC is connected to the
host.
Beep On Scan: Enables or disables beep sound when KDC is scanning.
O
PERATING YOUR
Revision 3.06.A3
Copyright®2014, KOAMTAC, Inc.
KDC
sleep
(when