Kdc Mode Menu; View Data Menu; Set Barcodes Menu; Code Options Menu - KoamTac KDC100 User Manual

KDC Mode Menu

The KDC Mode Menu has two options – Normal and Application modes.
Normal: This is the default mode which provides basic barcode scanning. In Normal mode
barcode data can be manipulated directly through the KDC or using KTSync
synchronization process.
Application: This mode allows you to run the user application created by Application Generation Tool
described in Chapter 6.

View Data Menu

This menu option allows you to view and/or delete barcodes stored in the KDC.

Set Barcodes Menu

This menu lists all the barcode symbologies supported by your KDC and allows you to select the barcode
symbologies you will be scanning. For maximum scan performance, you should select only the
symbologies you are scanning. Please refer to Appendix A.1 – Symbologies for a detailed listing of
symbologies supported by your KDC.

Code Options Menu

Your KDC supports various Code Options including Transmission of Start and Stop Characters, Symbology
Conversion, Verification of Optional Check Character, Transmission of Check Digit, and Concatenate.
Please refer to Section 4.3 and Honeywell IT5x80 reference manual for a detailed listing of Code Options
for the symbologies supported by the KDC.

Scan Options Menu

Timeout: Allows you to set the length of time before the KDC will stop scanning a barcode from .5
second up to 10 seconds. The default is 2 seconds.
Minimum Barcode Length: Allows you to set a barcode length from 2 characters to 36 characters. It is
strongly recommended that you maximize the minimum barcode length setting to prevent possible
errors. The default is 4 characters.
Partial Display: Allows you to display partial data. User defines the start position and number of
characters to be displayed.
28
KDC300 User Manual
®
during the