KoamTac KDC20 User Manual page 110

KDC User Manual
S
YNCHRONIZATION
Data Edition







Other Options

110
Attach serial number
The KTSync will add a KDC serial number to barcode data. This option is
enabled by default and cannot be disabled.
Attach time stamp
The KTSync would add timestamp to barcode data. This option is enabled by
default and cannot be disabled.
Attached barcode type
The KTSync would add barcode type to barcode data. This option is enabled by
default and cannot be disabled.
Serial number
When Attach serial number is enabled, this option determines when to attach
serial number. "Start of record" means to attach at the front of record and "End
of record" means to attach to the end of record.
Data order
This option specifies the order of data (Barcode Type, Barcode Data and
Timestamp) in the record.
Data delimiter
This option is used to select a character to be added between barcode data,
serial number and timestamp and/or barcode type. User can select one of the
following: None, Tab, Space, Comma and Semicolon as the data delimiter. The
Comma is selected as the data delimiter by default.
Record delimiter
This option is used to select a character to be added at the end of the barcode
record. The user can select one of None, CR, LF, TAB, and CR&LF as the record
delimiter. The CR&LF is selected as the record delimiter by default.
Non-English keyboard
This option is used when the barcode data has non-English characters and a
non-English keyboard.
Revision 3.06.A3
Copyright®2014, KOAMTAC, Inc.