KoamTac KDC20 User Manual page 62

KDC User Manual


Handshake
KDC provides Handshake mode when Data Format is set to Packet Data.



Terminator
The KDC supports various termination characters when the Data Format mode is set to
Barcode Only. This option allows you to select <NONE>, <CR>, <LF>, <CR+LF>, or <TAB>
as the termination character. The default terminator is <CR+LF>. The Up/Down/Left/Right
arrow terminator is also available for HID mode.
Chk Duplicate
This option prevents you from collecting duplicate data.
Enter Key
This option determines the behavior of the '#' key on the KDC350 keypad.

62
AIM ID - Allows you to add AIM ID to scanned data, which can then be stored in the
KDC or wedged to the host. AIM ID must be defined in the Data Format menu of
KTSync. AIM ID is added to the end of either a Prefix or Suffix.
Partial Data: Allows you to store and/or transfer partial data. The user defines the
start position and number of characters to be stored and/or transferred.
x
 Select the characters from
 Set Partial Data Start Position to
Action to Select
 Partial Data Length
x
 Erase the characters from
 Set Partial Data Start Position to
Action to Erase
 Partial Data Length
Handshake Mode will increase the reliability of barcode data transmission.
The default mode for Handshake is Disabled.
Data transmission speed is slower when Handshake Mode is Enabled.
(KDC350 Only)
If this option is enabled, the '#' key acts as a keyboard enter key.
 The '#' key finishes the current data input, and stores/sends input data
according to the menu settings of Wedge/Store.
 The cursor moves to next line after the current data input is complete,
regardless of whether there is an data input or not.
 The screen is scrolled up one line if the '#' key is pressed on the last line of KDC
screen.
y
position
y
, Partial Data Length to
0
selects all characters from
y
position
y
, Partial Data Length to
0
erases all characters from
Revision 3.06.A3
Copyright®2014, KOAMTAC, Inc.
O KDC
PERATING YOUR
x,
Partial Data
y
position.
x,
Partial Data
y
position.