Usb Disk - 100M/200M/250M/300M/350 - KoamTac KDC20 User Manual

KDC User Manual

GPS Hot Key
The KDC350 provides the following hot keys for convenient GPS operations:





USB DISK - 100M/200M/250M/300M/350

KDC100M/200M/250M/300M/350 can be used as a USB Disk with 4MB space.
USB Disk
This option allows user to change to USB Disk mode and barcode data that KDC scanned is
stored into a file in flash disk when this option is selected.
Disk Format
This option is available in USB Disk mode and allows users to format KDC USB Disk.
Record Format
This option selects the record format of the data that will be stored in the disk file.
67
Reset GPS: Reset GPS parameters
GPS Power Enable
 If Auto Power Off is enabled and GPS power is disabled, users can turn on the
GPS power by pressing the SCAN button.
 Users should hold the SCAN button for more than 3 seconds to turn on the GPS
power.
GPS Bypass mode Enable/Disable
 If GPS power is enabled, users can toggle GPS Bypass mode by pressing the
SCAN button.
 Users should hold the SCAN button for more than 3 seconds to toggle GPS
bypass mode.
GPS Acquire test cancellation
 Users can cancel the GPS acquire test by pressing the SCAN button during the
test.
GPS Data append cancellation
 Users can cancel GPS data append by pressing SCAN button if GPS data is not
available immediately.
 Users should hold the SCAN button for more than 3 seconds to cancel GPS data
append.
Data

Data Time

O
PERATING YOUR
Revision 3.06.A3
Copyright®2014, KOAMTAC, Inc.
KDC