Kdc Mode Menu; View Data Menu; Set Barcodes Menu; Code Options Menu - KoamTac KDC100 User Manual

3.3.1 KDC Mode Menu

The KDC Mode Menu has two options – Normal and Application modes.
Normal: This is the default mode which provides basic barcode scanning. In Normal

mode barcode data can be manipulated directly through the KDC or using KTSync
during the synchronization process.
Application: This mode allows you to run the user application created by Application

Generation Tool described in

3.3.2 View Data Menu

This menu option allows you to view and/or delete barcodes stored in the KDC.

3.3.3 Set Barcodes Menu

This menu lists all the barcode symbologies supported by your KDC and allows you to select the
barcode symbologies you will be scanning. For maximum scan performance, you should select
only the symbologies you are scanning. Please refer to
listing of symbologies supported by your KDC.

3.3.4 Code Options Menu

Your KDC supports various Code Options including Transmission of Start and Stop Characters,
Symbology Conversion, Verification of Optional Check Character, and Transmission of Check
Digit. Please refer to Appendix A.2 Options for a detailed explanation of each option.

3.3.5 Scan Options Menu

Scan Angle (Opticon model only): Allows you to configure the laser beam angle to the

barcode. Wide is 54
Filter (Opticon model only): Allows you to change the Filter mode from Normal to High

for poor quality barcodes.
The default is Normal.
Timeout: Allows you to set the length of time before the KDC will stop scanning a

barcode from .5 second up to 10 seconds. The default is 2 seconds.
Chapter 7.
o o
and Narrow is 27 . The default is Wide.
50
KDC User Manual
Appendix A.1 – Symbologies
Revision 3.05.R6
Copyright ® 2013, KoamTac, Inc.
®
for a detailed