KoamTac KDC20 User Manual page 55

KDC User Manual
This option allows you to configure the laser beam angle to the barcode. There are two
options for scan angle: Wide and Narrow. Wide is 54
Filter
(Opticon model only)
This menu allows you to change the Filter mode from Normal to High for poor quality
barcodes. The default is Normal.
Timeout
In this menu, you can set the interval between scans. The timeout options are from 5 seconds
up to 10 seconds. The default is 2 seconds.
Minimum Barcode Length
This option allows you to set a barcode length from 2 characters to 36 characters
(KDC20/100/200/250/350L/410/415) or 2 characters to 48 characters
(KDC30/300/350C/420/450). It is strongly recommended that you maximize the minimum
barcode length setting to prevent possible errors.
 The default minimum barcode length of KDC20/100/200/250/350L/410/415 is 4
 The default minimum barcode length of KDC30/300/350C/420/450 is as follows:
1D Symbology
55
characters.
Codabar
Code 11
Code 32
Code 39
Code 93
Code 128
EAN-8
EAN-13
GS1 Composite
I2of5
Matrix 2of5
MSI
Plessey
PosiCode
GS1 Omni
GS1 Limited
GS1 Expanded
S2of5 Ind
S2of5 IATA
O
PERATING YOUR
o and Narrow is 27
Minimum (Default)
2(4)
1(4)
0(0)
0(0)
0(0)
2(4)
1(4)
4(4)
4(4)
2(4)
4(4)
1(4)
1(4)
Revision 3.06.A3
Copyright®2014, KOAMTAC, Inc.
KDC
o . The default is Wide.
Maximum (Default)
60(60)
80(80)
48(48)
80(80)
80(80)
80(80)
80(80)
48(48)
48(48)
80(48)
74(74)
48(48)
48(48)