Elba E74-200 Instructions For Use - Installation Advice page 21

6
6
G S INST LL TION REQUIREMENTS
Important !
Before installation, make sure that the local distribution conditions (gas type and pres-
sure) and the adjustment of this appliance are compatible. The appliance adjustment
conditions are given on the plate or the label.
This appliance must be installed and serviced only by a suitably qualified, registered
installer with technical knowledge of both gas installation and electricity. The installa-
tion or service must comply with the current editions of the applicable standards, regu-
lations, and codes of practice governing gas and electrical installations.
Failure to install the appliance correctly could invalidate any manufacturer's warranty.
This appliance is supplied for use on NATURAL GAS or LPG (check the gas regulation
label attached on the appliance).
Appliances supplied for use on NATURAL GAS: they are adjusted for this gas only
and cannot be used on any other gas (LPG) without modification. The appliances are
manufactured for conversion to LPG.
Appliances supplied for use on LPG: they are adjusted for this gas only and cannot be
used on any other gas (NATURAL GAS) without modification. The appliances are
manufactured for conversion to NATURAL GAS.
If the NATURAL GAS/LPG conversion kit is not supplied with the appliance this kit can
be purchased by contacting the After-Sales Service.
G S SECTION
21