Table of Contents
Advertisement
4
Command Line Interface
• auth_port - RADIUS server UDP port used for authentication messages.
(Range: 1-65535)
• acct_port - RADIUS server UDP port used for accounting messages.
(Range: 1-65535)
• timeout - Number of seconds the switch waits for a reply before resending
a request. (Range: 1-65535)
• retransmit - Number of times the switch will try to authenticate logon access
via the RADIUS server. (Range: 1-30)
• key - Encryption key used to authenticate logon access for client. Do not
use blank spaces in the string. (Maximum length: 20 characters)
Default Setting
• auth-port - 1812
• acct-port - 1813
• timeout - 5 seconds
• retransmit - 2
Command Mode
Global Configuration
Example
Console(config)#radius-server 1 host 192.168.1.20 auth-port 181 timeout
10 retransmit 5 key green
Console(config)#
radius-server auth-port
This command sets the RADIUS server port used for authentication messages. Use
the no form to restore the default.
Syntax
radius-server auth-port port_number
no radius-server auth-port
port_number - RADIUS server UDP port used for authentication
messages. (Range: 1-65535)
Default Setting
1812
Command Mode
Global Configuration
Example
Console(config)#radius-server auth-port 181
Console(config)#
4-82
Hide quick links:
Advertisement
Table of Contents
