Lldp Dot1-Tlv Vlan-Name; Lldp Dot3-Tlv Link-Agg - Edge-Core ES3510 Management Manual

4
Command Line Interface
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The port's default VLAN identifier (PVID) indicates the VLAN with which
untagged or priority-tagged frames are associated (see "switchport native vlan"
on page 4-228).
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv pvid
Console(config-if)#

lldp dot1-tlv vlan-name

This command configures an LLDP-enabled port to advertise its VLAN name. Use
the no form to disable this feature.
Syntax
[no] lldp
dot1-tlv vlan-name
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises the name of all VLANs to which this interface has been
assigned. See "switchport allowed vlan" on page 4-229 and "protocol-vlan
protocol-group (Configuring Interfaces)" on page 4-243.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv vlan-name
Console(config-if)#

lldp dot3-tlv link-agg

This command configures an LLDP-enabled port to advertise link aggregation
capabilities. Use the no form to disable this feature.
Syntax
[no] lldp
dot3-tlv link-agg
4-190