| Introduction
C
1
HAPTER
Description of Hardware
P
S
ORT AND
YSTEM
The switch includes a display panel for key system and port indications that
simplify installation and network troubleshooting. The LEDs, which are located
on the front panel for easy viewing, are shown below and described in the
following tables.
Figure 4: Port LEDs
System Status LEDs
RJ-45 Port Status LEDs
Table 1: 1000 Mbps SFP Port Status LEDs (1~24)
LED
Condition
(Link/Activity)
On/Flashing Green
Off
S
LED
TATUS
S
SFP Port Status LEDs
Status
Port has established a valid 1000 Mbps network
connection. Flashing indicates activity.
There is no valid link on the port.
– 28 –