Table of Contents
Advertisement
4
Command Line Interface
show cluster candidates
This command shows the discovered Candidate switches in the network.
Command Mode
Privileged Exec
Example
Console#show cluster candidates
Cluster Candidates:
Role
--------------- ----------------- -----------------------------------------
ACTIVE MEMBER
CANDIDATE
Console#
UPnP Commands
Universal Plug and Play (UPnP) is a set of protocols that allows devices to connect
seamlessly and simplifies the deployment of home and office networks. UPnP
achieves this by issuing UPnP device control protocols designed upon open,
Internet-based communication standards.
Command
upnp device
upnp device ttl
upnp device advertise
duration
show upnp
upnp device
This command enables UPnP on the device. Use the no form to disable UPnP.
Syntax
[no] upnp device}
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
You must enable UPnP before you can configure time out settings for sending
of UPnP messages.
4-316
Mac
Description
00-12-cf-23-49-c0 24/48 L2/L4 IPV4/IPV6 GE Switch
00-12-cf-0b-47-a0 24/48 L2/L4 IPV4/IPV6 GE Switch
Table 4-1. UPnP Commands
Function
Enables/disables UPnP on the network
Sets the time-to-live (TTL) value.
Sets the advertisement duration of the device
Displays UPnP status and parameters
Mode
Page
GC
4-200
GC
4-201
GC
4-201
PE
4-202
Hide quick links:
Advertisement
Table of Contents
