3
Configuring the Switch
CLI – This example enables web authentication for ethernet port 1/5 and displays a
summary of web authentication parameters.
Console(config)#interface ethernet 1/5
Console(config-if)#web-auth
Console(config-if)#end
Console#show web-auth summary
Global Web-Auth Parameters
System Auth Control
Port
Status
----
------
1/ 1
Disabled
1/ 2
Enabled
1/ 3
Disabled
1/ 4
Disabled
1/ 5
Enabled
1/ 6
Disabled
1/ 7
Disabled
1/ 8
Disabled
1/ 9
Disabled
1/10
Disabled
Console#
Displaying Web Authentication Port Information
This switch can display web authentication information for all ports and connected
hosts.
Command Attributes
• Interface – Indicates the ethernet port to query.
• IP Address – Indicates the IP address of each connected host.
• Status – Indicates the authorization status of each connected host.
• Remaining Session Time (seconds) – Indicates the remaining time until the
current authorization session for the host expires.
Web – Click Security, Web Authentication, Port Information.
3-82
: Enabled
Authenticated Host Count
------------------------
0
0
0
0
0
0
0
0
0
0
Figure 3-56 Web Authentication Port Information
4-150
4-118
4-120