Edge-Core ES3510 Management Manual page 90

3
Configuring the Switch
Object Label
linkUp
authenticationFailure
RMON Events (V2)
risingAlarm
fallingAlarm
Private Traps
swPowerStatus
ChangeTrap
swIpFilterRejectTrap
a. These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps
on the SNMP Configuration menu.
3-44
Table 3-5 Supported Notification Messages (Continued)
Object ID
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.5
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
1.3.6.1.4.1.259.6.10.94.2.1.0.1
1.3.6.1.4.1.259.6.10.94.2.1.0.40 This trap is sent when an incorrect IP address is
Description
A linkUp trap signifies that the SNMP entity,
acting in an agent role, has detected that the
ifOperStatus object for one of its
communication links left the down state and
transitioned into some other state (but not into
the notPresent state). This other state is
indicated by the included value of ifOperStatus.
An authenticationFailure trap signifies that the
SNMPv2 entity, acting in an agent role, has
received a protocol message that is not
properly authenticated. While all
implementations of the SNMPv2 must be
capable of generating this trap, the
snmpEnableAuthenTraps object indicates
whether this trap will be generated.
The SNMP trap that is generated when an
alarm entry crosses its rising threshold and
generates an event that is configured for
sending SNMP traps.
The SNMP trap that is generated when an
alarm entry crosses its falling threshold and
generates an event that is configured for
sending SNMP traps.
This trap is sent when the power state changes.
rejected by the IP Filter.