Setup Menu; Print Timeout; Auto Continue - Lexmark J110 User Manual

Setup Menu

Use this menu to change printer warm-up time, how long the printer waits when it detects an error,
what language you want displayed on the operator panel, whether you want to be alerted when the
printer needs attention, and how long the printer waits before printing the next page.
• P T
RINT IMEOUT
• A C
UTO ONTINUE
• D L
ISPLAY ANGUAGE
• A C
LARM ONTROL
• I L A
NK OW LARM
• D T D
RY IME ELAY

Print Timeout

Use the Print Timeout setting to set the number of seconds the printer waits before printing the last
page of a job that does not end with a command to print the page. When Print Timeout is disabled, the
printer does not print the last page of a job until it has enough information to fill a page or it receives a
Form Feed command.
Menu item
Print timeout
*Default setting

Auto Continue

If the printer is unattended on a network, use the Auto Continue setting to tell the printer how long to
wait after detecting one of the following errors before resuming printing:
•
34 Short Paper
•
Memory Full
•
54 Std Par ENA
•
56 Std Parallel Port Disabled
•
88 Cartridge Low
If Auto Continue is disabled, the printer stops and waits for operator intervention.
Menu item
Auto Continue
*Default setting
Value
Disabled*
=1...240 (90*)
Value
Disabled*
=5...255
92