Paper Feeding - Lexmark J110 User Manual

Paper feeding

To reduce paper jams, see
. Solutions to other paper feeding problems are listed below.
JAMS
Cause
You cannot see or reach the
paper jam.
You get a jam when you
remove a tray to add paper
while the printer is printing.
The paper jams in tray 1 or
tray 2.
You cleared a paper jam and
pressed , but the jam
Go
message remains.
Your job is skewed.
C
HOOSING THE RIGHT MEDIA
Solution
Press continuously to advance the paper incrementally until you can
Menu>
reach the paper and pull it out.
Refill the tray, reinsert it and press
The paper length guide is pushed too tightly against the paper, causing it to
bend against the paper supports. Make sure the paper is lying flat in the tray.
The paper exceeds the stack height level on the right side of the tray.
Check for any other paper in the path, remove it and press
Make sure the paper guides are set correctly.
Make sure the paper tray is completely inserted in the printer.
. To solve paper jams, see
Go.
78
C
LEARING PAPER
.
Go