Lexmark J110 User Manual page 35

If you are loading:
Source:
Trays 1 and 2
Do not load envelopes in tray 1 or
tray 2.
Manual Feeder
Do not use the manual feeder to
print PerfectFinish jobs.
Load up to:
250 sheets of plain paper
2
(20 lb, 75 g/m )
250 sheets of letterhead
2
(20 lb, 75 g/m )
250 sheets of coated paper (20 lb,
2
75 g/m )
225 transparencies
150 sheets of labels
1 sheet of paper
1 sheet of letterhead
1 sheet of coated paper
1 transparency
1 label sheet
1 index card
1 envelope
1 iron-on transfer
26
Make sure the:
Recommended print side is face
down.
Logo is face down facing the back of
the tray.
Glossy side is face down.
Rough side is face down with the
removable strip facing the back of
the tray. Remove each transparency
as it exits the printer.
Print side is face down.
Recommended print side is face up.
Logo is inserted first, face up.
Glossy side is face up.
Removable strip is inserted first with
the rough side face up. Remove the
transparency as it exits the printer.
Print side is face up.
Index card is inserted vertically with
print side face up.
Envelope is inserted vertically with
flap side down and stamp area as
shown.
Blank side is face up.