2
Printing from Windows
Your printer is set up, your Lexmark driver is installed
transparencies, add a Do Not Copy watermark, make the colors on a chart more vibrant? It's easy to
change printer settings for any job you print.
-FOR EXAMPLE-
Let's say your printer has plain paper loaded in tray 1, but you want to print a letter from tray 1 and an
envelope from the manual feeder (or multipurpose feeder if installed).
1
Load letterhead in tray 1 and an envelope in the manual feeder (or multipurpose feeder) and
change the corresponding operator panel settings.
2
Open the File Menu from your software application.
3
Choose Print (or Printer) Setup to open your printer driver.
4
In the Print Setup dialog box, click
application).
5
Click the Setup tab.
6
From the Paper Type setting, select Letterhead.
7
In the Print dialog box, click
Now print the envelope:
1
In the Print Setup dialog box, click
2
Click the Setup tab.
3
From the Paper Type setting, select the size envelope you want.
4
Change Orientation to Landscape.
5
In the Print dialog box, click
If you need an explanation about a printer setting, help is just a click away:
•
Click the Help box in the bottom right corner of any dialog box.
•
Click the question mark at the top of any dialog box and then move your cursor to the setting
you want to know about.
•
Move your cursor to the setting in question and press F1 or right-click your mouse.
you are ready to print. Want to print
—
,
Properties
Options
to print your job.
OK
.
Properties
to print your job.
OK
3
, or
(depending on the
Setup