Chapter 5: Changing Operator Panel Settings - Lexmark J110 User Manual

5
Changing operator panel settings
Changing settings from the operator panel affects everyone who uses the printer. Changing settings
from your software application or printer driver override everything except the Paper Size and Paper
Type settings on the operator panel, but the new settings only apply to the job you are sending to the
printer. If your print job requires reconfiguring the printer (i.e., printing on media that is different from
what is loaded), change the operator panel settings and driver settings.
-FOR EXAMPLE-
Let's say you share the printer. It is configured with plain paper in tray 1, legal paper in tray 2 and
transparencies in the multipurpose feeder.
You want to print a scanned image with the highest print quality from the multipurpose feeder.
1
Load Photo Paper in the multipurpose feeder.
2
Press until you see Paper Menu.
Menu>
3
Press .
Select
Paper Source appears on the second line.
4
Press .
Select
5
Press until you see MP Feeder on the second line of the display.
Menu>
6
Press .
Select
An asterisk appears indicating that MP Feeder is the new default setting.
7
Press until Paper Type appears on the second line of the display.
Menu>
8
Press .
Select
9
Press until MP Feeder Type appears on the second line of the display.
Menu>
10
Press .
Select
11
Press until Photo Paper appears.
Menu>
12
Press .
Select
An asterisk appears indicating that Photo Paper is the new default setting for the MP Feeder.
13
Press to go back to
Return
14
In your printer driver, change the Print Quality setting to Best and Paper Type to Photo.
15
Send your job.
.
Ready
13