Chapter 20: Adding Hardware Options; From Windows; From A Macintosh Computer - Lexmark J110 User Manual

20
Adding hardware options
If you add or remove the optional multipurpose feeder or paper tray 2, you need to update the printer's
configuration through your printer driver.

From Windows

1
Open the File Menu.
2
Choose Print (or Printer) Setup.
3
In the Print Setup dialog box, click the
4
Click the Printer Configuration tab.
(If you are using Windows NT or Windows 2000, go to Start, Settings, Printers, J110, and
right-click your mouse to select the Properties Menu, then click the Printer Configuration tab.)
5
From the list of Available Options, highlight the option you installed and click the
The option appears under Installed Options.
To remove an option, highlight it from the list of Installed Options and click the
The option reappears under Available Options.
6
If you installed bidirectional support, click the
Available Options and Installed Options are updated automatically.

From a Macintosh computer

1
From the pop-up menu, select Installed Options.
2
Click the check box to select the options you installed.
3
Click the check box again to remove an option.
button.
Properties
Automatic Configuration
63
button.
Add
button.
Remove
button and both the