Refitting The Starter Motor; Cylinder Assy. And Timing System; Removing The Intake Manifold; Removing The Cylinder Head - Derbi GP1 50 cc Workshop Manual

R R
EFITTING THE STARTER MOTOR EFITTING THE STARTER MOTOR
- Fit a new 0-ring on the starter motor and lubricate it.
- Install the starter motor on the crankcase and tighten the
two screws with the prescribed torque.
N.B.
FIT THE REMAINING PARTS AS DESCRIBED IN THE CHAP-
TERS CYLINDER, CYLINDER HEAD, VALVE GEAR, LUBRICA-
TION, FLYWHEEL AND TRANSMISSION.
Locking torques (N*m)
Starter motor screws 11÷13

CYLINDER ASSY. AND TIMING SYSTEM

R
EMOVING THE INTAKE MANIFOLD O G
Using the TORX spanner, remove the 2 intake manifold fixing
screws
R
EMOVING THE CYLINDER HEAD O G C
Remove the four nuts shown in the picture.
60
O