Inspecting The Front Wheel - Derbi GP1 50 cc Workshop Manual

D D
ISMANTLING ISMANTLING
WARNING
- ENSURE THAT THE MOTORCYCLE IS SUPPORTED FIRMLY
AND THERE IS NO RISK OF IT FALLING.
- PLACE THE MOTORCYCLE ON A FLAT SURFACE.
1. Extract:
- Front brake calliper (Bolts 1 and 2).
2. Extract:
- Nut protecting cover.
- Nut (left side).
3. Raise:
- Front wheel
(Put a suitable support under the engine).
4. Extract:
- Front wheel axle.
- Front brake disk assembly.
- Dustguard/spacer.
- Front wheel.
I I
NSPECTING THE FRONT WHEEL NSPECTING THE FRONT WHEEL
1. Inspect:
- Front wheel axle. (By rolling it on a flat surface).
Warping => Replace.
WARNING
DO NOT TRY STRAIGHTENING A WARPED AXLE.
Wheel axle warp limit:
0,25 mm
2. Inspect:
- Neumático delantero.
Damage/wear => Replace.
81