Dismantling The Machine's Engine; Automatic Transmission - Derbi GP1 50 cc Workshop Manual

D D
ISMANTLING THE MACHINE ISMANTLING THE MACHINE S ENGINE
1) Disconnect the battery.
2) Completely remove the exhaust pipe.
3) Remove the rear wheel.
4) Disconnect the electrical wiring from the magneto.
5) Disconnect the throttle and mixer activating transmis-
sions.
6) Disconnect the oil pipes from the mixer, the carburettor
and the pump depression control on the carburettor.
7) Disconnect the H.T. cable from the spark plug.
8) Remove the spring from the left hand front part of the
Silent bloc.
9) Remove the Allen bolt from the right hand front part of
the Silent bloc.
10) Remove the two bolts and corresponding nuts secu-
ring the rear of the engine.
A A
UTOMATIC TRANSMISSION UTOMATIC TRANSMISSION
- Lossen the 15 screws and remove the transmission cover
with the aid of a mallet.
N.B.
THE CRANKCASE IS RESTRAINED BY THE TIGHT FITTING
BETWEEN THE SHAFT OF THE DRIVEN HALF-PULLEY AND
THE BEARING HOUSED ONTO THE CRANKCASE.
43
'
S ENGINE