R
R
EFITTING THE FLYWHEEL COVER
EFITTING THE FLYWHEEL COVER
- Fit the rubber seal on the flywheel connector and around
the inlet coolant hose.
- Keeping the flywheel connector rubber clamp on the
coolant inlet hose, refit the flywheel cover paying attention
in inserting the strap in the groove.
- Tighten the 8 fixing screws.
FLYWHEEL AND STARTING
R
R
EMOVING THE STARTER MOTOR
EMOVING THE STARTER MOTOR
- Remove the fixings shown in the picture.
R
R
EMOVING THE FLYWHEEL MAGNETO
EMOVING THE FLYWHEEL MAGNETO
- Lock the flywheel using the compass spanner.
- Remove the nut.
CAUTION
USING A COMPASS SPANNER OTHER THAN THE ONE PRO-
VIDED CAN DAMAGE THE STATOR COILS.
58